Eddy Current Surface Probes
Surface Probes are used for a variety of surface and subsurface inspection.
These probes are built with a flat bottom to offer better stability on the surface being inspected. These eddy current sensors are available in absolute mode and in bridge or differential configurations. All surface probes are shielded and available in several frequencies.
HIGHLIGHTS
Bridge or Reflection configuration
Absolute mode
Shielded
Several Frequency Ranges
Contact us for a quote.
EXAMPLES:
- SS-.750-50 kHz
- Bridge probe
- Absolute shielded coil
- 0.750 inch OD
- 50 kHz frequency
- SSR-.750-50 kHz
- Reflection probe
- Absolute shielded coil
- 0.750 inch OD
- 50 kHz frequency
All bridge configurations are fitted with Triax connectors.
All reflection configurations are fitted with 4-socket Fischer connectors.
CABLES:
P/N 92836 (NSN: 5995-01-420-3422) for bridge probes, 8-pin Burndy/Triax
P/N 94032 (NSN: 5995-01-518-4366) for reflection probes, 8-pin Burndy/4-pin Fischer
P/N 72871 for bridge probes, 27-pin Fischer/Triax
P/N 72872 for reflection probes, 27-pin Fischer/4-pin Fischer
P/N 99146 for bridge probes, 16-pin Lemo/Triax
P/N 94186 for reflection probes (NSN: 6635-01-548-4604) 16-pin Lemo/4p Fischer
Reach Out To Us
Ready for more information or an on-site demonstration?
Click the button below to get started!